ECL-ACC900 (Use standalone or with ECL-ACC1000)

# 12 Numeric keypad,1 bicolor LED(green and red) and     buzzer indicator
# 11 sets of time code
# 120 holiday schedules
# Keypad will lock for 30 seconds after continuous error     operation
# Built-in watchdog to prevent system halting
# Support door relay auto -relock function
# RS-485 ports supported for networking(Via Controller or     Directly)
# Built-in reader and additional reader support port for exit    or anti-pass-back function
# Control mode, card capacity and card type assignable by     user directly
# RF frequency/reading range: 125KHz/about 15 cm.
# Networking: RS-485 (9600,N,8,1)
# External reader port: Suitable for all WG,ABA reader,125K, 13.56M(Mifare) or 2.4G reader
# Door Relay: 2A/12 VDC N.O./N.C./COM 0.1~600sec. Latch type
# Alarm Relay: Transistor Output/Serial Output(Selective)
# Tamper Switch: External AR-401R016
# Serial port: Limit switch(Form C)
# Material: ABS
# Dimensions: 112(L)x 76(W)x25(H)mm.

# Wiegand proximity card reader
# Simple installation
# Easily blends with any decorative design
# Standalone or network operation,
    When used with ECL-ACC900, 950 or 1000
# Sealed for outdoor use
# Up to 1,024 users
# Low profile design
# Network interface: WG 26/34,ABAII,ASYNC 9600, N,8,1
# Available ports : Tamper switch, wiegand port
# Card users: Card only : 65,536
    (1,024 with card and Pin Combination)
# Anti-Pass-Back: multi door when used with ACC1000
# Wiegand port: 1(WG26,WG34)
# Indicators: Bicolor LED(green, red and buzzer)
# Remote operation: supported( using ACC1000)
# Reader range: 8 cm.
# Request to exit supported
# DI input: egress button,door contact, arming switch
# Environment: suitable for outdoor user
# Construction: ABS body
# Voltage: 9-18 VDC variable auto detection
# Current draw : 1 watt
# Temperature/Humidity: -10C-50C / 0-90% Rh max
# Dimensions: 80(L)x43(W)x15(H)mm.